Serial Drivers Win 7 32 bit « LeafLabs Garden

Serial Drivers Win 7 32 bit

(3 posts) (2 voices)

smath
Member

Okay, so using the instructions on the IDE installation page (http://leaflabs.com/docs/maple-ide-install.html) I'm able to get the DFU driver working. I can now upload the blink sketch and change the rate at which it blinks and everything. The problem is that I was never prompted to add the serial driver as the instructions said I would be. When I run the IDE I go to tools>serial port, and it's grayed out. How can I get the serial driver installed?

Posted 3 years ago #
smath
Member

Nevermind. I just figured it out. In case anyone else runs into the same problem, once the DFU driver is installed, you just need to open device manager while the board is not in perpetual bootloader mode and update the driver, selecting the driver>serial folder.

Posted 3 years ago #
brucemellen
Member

Thanks for posting what you figured out. Perhaps it should be put with the DOCS/maple-ide-install.html ???

Posted 3 years ago #

You must log in to post.