How do I customize bootloader for RET6 ?

(3 posts) (2 voices)

tsukuri
Member

Hi.

I replaced the MCU with a STM32F103RET6 on my maple board, and I programed the “factory-default” bootloader(binary for Maple RET6 Edition) to my board. It works fine.

Now I'm trying to customize the bootloader, however, I cannot find the source of the bootloader for RET6 in github.

Is there any patch for the source code of maple bootloader which I got from github to work with RET6?

Thank you very much.

Posted 4 years ago #
poslathian
LeafLabs

the different bootloaders live in different branches of the github repo. You can switch branches with the "branches" tab on the upper left - for the RET6 bootloader go here:

https://github.com/leaflabs/maple-bootloader/tree/maple-ret6

In general, this is an admittedly weak way to share bootloaders across the devices. Eventually, the goal is to migrate everything into a single master bootloader that has a single point of configuration for different products.

Posted 4 years ago #
tsukuri
Member

Thank you. I'm studying on the source code.

I'll be happy to see the general configure script for all different devices.

Posted 4 years ago #

Reply

You must log in to post.