LeafLabs Garden

A place to share, learn, and grow...

1. 

   Platoon
   Member

   Board: Maple r5
   OS: Linux Debian Wheezy (Testing) x64

   I got my maple yesterday and after a lot of hard work fixing bugs everything works great except for one thing.

   The IDE wont see ttyACM, only ttyS0 and ttyS1..

   Other than the IDE i can perfectly communicate with it using "screen /dev/ttyACM0"

   Since i can work through "screen" this isnt a problem to me but i thought i should report it anyway.

   Note: i have setup the groups just fine so its not that i dont have access rights or something

   Posted 3 years ago #
2. 

   mbolivar
   LeafLabs

   Strange. Thanks for the report.

   Posted 3 years ago #
3. 

   Platoon
   Member

   So after a few days of not doing anything about it. Today i fixed the problem

   I replaced librxtxSerial.so and RXTXcomm.jar
   withe those found in the Arduino IDE version 1.0.1 (latest).

   Note that the librxtxSerial.so and RXTXcomm.jar i was using ware those downloaded from 'http://static.leaflabs.com/pub/librxtx/' since the originals wouldnt work at all.

   Now Maple IDE will perfectly find ttyACM0 meaning i get to use the Serial Monitor and upload code without using Perpetual Bootloader Mode.

   Posted 3 years ago #
4. 

   mbolivar
   LeafLabs

   Ah, oops. Right. 32-bit native libraries on x64.

   Sigh. I'll make sure to get a 64-bit IDE out for v0.0.13.

   Posted 3 years ago #

RSS feed for this topic

Reply

You must log in to post.