Trouble Loading Code « LeafLabs Garden

Trouble Loading Code

(3 posts) (2 voices)

minerva
Member

Hi All,
I am having trouble uploading code to my new Maple Rev 5 on WIn7 x64bit . So to begin with I was able to upload and run code on the maple a bit ago. But then my computer spazzed out and I had to reformat it. I followed the instructions(again) from http://forums.leaflabs.com/topic.php?id=73#post-788 to install the dfu driver and the serial driver.

I believe both drivers are on correctly. I can enter perpetual bootloader mode, but still cant seem to upload any code to the board. There is an old program on there that spits out something in serial monitor and it seems to work, so the board is functional( I think).

Please Help!!!

Posted 4 years ago #
minerva
Member

If anyone cares, I was able to fix the problem by disabling the windows digital driver stuff using
Driver Signature Enforcement Overrider 1.3 from http://www.ngohq.com/home.php?page=dseo

Posted 4 years ago #
crenn
Moderator

When I had to install the DFU drivers a couple of weeks ago (as compiling on my desktop is a lot faster), I didn't need the Driver Signature Enforce Overrider. What version of the drivers did you use from libusb-win32?

Also, what was your upload procedure? Did you let the IDE attempt to restart the board and it couldn't find it? Or did you put it into perpetual bootloader mode and just click upload?

Posted 4 years ago #

You must log in to post.