Maple Native Specifications « LeafLabs Garden

Maple Native Specifications

(4 posts) (1 voice)

importer
Inactive

on Thu 25 of Feb., 2010 15:01 EST, by JonnyBoats

I see from the question on DAC that the Maple native may have capabilities beyond those of Maple "Classic".

I would definitely be interested in a more powerful Maple. Specifically I would be interested in running Microsoft's .net micro-framework which is now open source.

Here are the requirements for micro-framework:

Smallest Footprint 64KB RAM, 256KB Flash
Processor
ARM7 (with or without MMU)
ARM Cortex M3
ARM9
ADI BlackFin

Since the Maple already has an ARM Cortex M3, the primary requirement would be for more memory.

Any chance of a Maple that could do this?

Posted 5 years ago #
importer
Inactive

on Fri 26 of Feb., 2010 17:10 EST, by okie

You're going to be taken care of. Maple Native is getting the 100-pin STM32 with maximum memory plus external RAM.

Posted 5 years ago #
importer
Inactive

on Sat 27 of Feb., 2010 19:40 EST, by boondaburrah

ooooh, fancy. This raises a question though, how does one go about adding external ram to an STM32F? The old STR7 had an external memory interface of some kind, but I couldn't find any on the STM32F.

Posted 5 years ago #
importer
Inactive

on Sat 27 of Feb., 2010 19:40 EST, by boondaburrah

ooooh, fancy. This raises a question though, how does one go about adding external ram to an STM32F? The old STR7 had an external memory interface of some kind, but I couldn't find any on the STM32F.

Posted 5 years ago #

You must log in to post.