Hello-
In a different topic, gbulmer outlined a way to implement demonstration source code from st.com using the Maple IDE.
Are there any readers who have done this successfully? In particular, I am interested in testing the st.com full speed USB library, but any descriptions of personal experience implementing another st.com library on the Maple will be helpful and appreciated. I am grateful to gbulmer for suggesting some ideas which would have taken me days to try, but I am hoping to hear that other Maple users have succeeded in porting the st.com code.
I am using a Windows XP system, but if you have used the st.com libraries with a linux/mac os system that news would be encouraging.
I did not mention this in the original message which prompted gbulmer's reply, but the demo code from the st.com web site was written to run on their evaluation boards.
I assume memory on the Maple will not be a problem, but if the 17K/20K SRAM is limiting the program can be uploaded to the 120K FLASH memory.
Thanks!
Stephen from NYC (full disclosure: I am not a member of the LeafLabs staff)
[my current development system (old, but still working)]