Justin
Member
I've tired entering the bootloader mode, without any success. I haven't gotten a single thing to run yet. Any help is appreciated.
Binary sketch size is reported above. Check it against a 108000 byte maximum.
Loading via dfu-util
Resetting to bootloader via DTR pulse
Searching for DFU device [1EAF:0003]...
dfu-util - (C) 2007-2008 by OpenMoko Inc.
This program is Free Software and has ABSOLUTELY NO WARRANTY
Couldn't find the DFU device: [1EAF:0003]
Abo
Member
I'm assuming you're running on a Windows platform? (Win 7? Win 8?)
Have you check if you have the proper driver installed? When switch between USB boot loader mode and serial mode, do you see the driver "libusb-win32 devices" during USB boot loader mode in your Device Manager? If not, you need to install the dfu driver.
Justin
Member
I forced it into the bootloader mode, slow blue blinking LED, won't recognize the DFU drivers as valid. It installs the Serial drivers just fine though in this mode. I tried to install the serial drivers while the led was blinking fast, it failed, attempted to install DFU drivers while in this mode and had a different error while installing the drivers.
And yes this is Windows 7 64-Bit.
EDIT: Fixed it, the stupid blink patterns were backwards, it was blinking fast when in bootloader mode, and slow in serial mode. Had to use libusb utility to install the dfu driver.
gbulmer
Moderator
@bigplik - I posted a suggestion at http://forums.leaflabs.com/topic.php?id=74420
You must log in to post.
