Hi All!
I recently got a Maple Rev. 5 development board to use with my Mac, but when I go to the tools menu in the latest IDE, I do not see the USB port the Maple is on — just Bluetooth-PDA-Sync and Bluetooth-Modem. When I try to upload a program, I get this error:
Going to build using 'armcompiler' (ARM) Compiling core... No libraries to compile. Compiling the sketch... Linking... Computing sketch size...
/var/folders/QD/QDogFv1FE2uZoRF1i+041U+++TI/-Tmp-/build3600946457027984692.tmp/Blink.cpp.bin : section size addr .data 12808 0 Total 12808
Binary sketch size is reported above. Check it against a 108000 byte maximum. Loading via dfu-util Resetting to bootloader via DTR pulse
Reset via USB Serial Failed! Did you select the serial right serial port? Assuming the board is in perpetual bootloader mode and continuing to attempt dfu programming...
Searching for DFU device [1EAF:0003]... dfu-util - (C) 2007 by OpenMoko Inc. This program is Free Software and has ABSOLUTELY NO WARRANTY
Found Runtime: [0x05ac:0x8206] devnum=0, cfg=0, intf=2, alt=0, name="UNDEFINED"
Couldn't find the DFU device: [1EAF:0003]
Another thing to note is that the D1 light is blinking at a brisk pace. I have tried everything on other forums. I have tried it on two Macs, so I do not think that the problem is the computer.
Thanks! -Andrew