LeafLabs Garden

A place to share, learn, and grow...

1. 

   alexsimps
   Member

   I had trouble with the "Couldn't find the DFU device: [1EAF:0003]". I noticed in the device manager that the hardware id was "PID_0004" so after uninstalling everything (and checking the delete drivers checkbox) i generated a new driver with libusb and changing the option of the hardware hex id from 0x0004 to 0x0003. Everything seems to work good now.
   Running windows 7 home premium on intel i3.

   Posted 1 year ago #
2. 

   NickV
   Member

   HI -

   I just got my first Maple yesterday and tried it on my Toshiba netbook
   with Windows 7 'Starter'. Your instructions got me downloading within
   an hour. I still haven't figured out the serial monitor yet, but thanks
   to you the important parts are running. Thank You.

   Posted 1 year ago #
3. 

   robodude666
   Member

   There are also a number of known ways to bypass or disable the signed driver requirement on 64-bit Windows Vista and 7.

   Also, since version 1.2.0.0, according to the libusb-win32 wiki, 64-bit Vista/7 are supported. Not sure if the MapleIDE still ships with an older version but it's worth updating if it is. I don't own a windows machine, so I can't test it out.

   -robodude666

   Posted 1 year ago #
4. 

   smath
   Member

   Okay, so I followed Bionic-Badger's instructions, but I'm not sure how to use the serial drivers. The Original IDE installation instructions say that after I reset the device after installing the DFU driver I should get prompted to add a serial driver, but I'm not getting that prompt. When I run the IDE the serial port menu item is grayed out. I tried uploading the blink sketch anyway, and something happened because when I get to where it should be running blink it does nothing rather than blinking as it did out of the package. Any ideas?

   Thanks,
   Steve

   Posted 1 year ago #
5. 

   mrlefebvre101
   Member

   I just got this working tonight. I didn't get the serial driver prompt either, but I noticed that when I reset normally (NOT to bootloader mode), I saw Maple R3 under "Other Devices" in the Windows device manager. I installed the serial driver to that device and I believe all is working well. I haven't tried to use the serial monitor yet, but it's available to me with an appropriate selection. Good luck!

   Posted 1 year ago #
6. 

   dezulm
   Member

   I and running Win7 64 bit. I was able to set up the dfu drivers to upload and the DFU is found. I tested the blink program and that works. Now I want to test Hello world. I cannot get the serial monitor to work. The Serial Port is grayed in the Tools menu on the IDE. I was never prompted for the serial drivers. I went into Device manager and manually added a device- comm port. I select the serial driver that came with the IDE. I then get an error code 10 and the driver cannot start. Any thoughts.

   Posted 1 year ago #
7. 

   dezulm
   Member

   I noticed that if you install the serial drivers first then the dfu drivers, then I can get both the serial and dfu working.

   Posted 1 year ago #
8. 

   Verde
   Member

   Running Win7x64. Trouble communicating between the PC and Maple board. Found this blog. Thanks for your step by step instructions Bionic Badger. Now communicating with my Maple R3 board received from Sparkfun today.

   Posted 12 months ago #
9. 

   Shak7
   Member

   Got it working because of your solution. Tks Bionic Badger !

   Posted 11 months ago #
10. 

    feurig
    Member

    For serial on winblows you can also look at Paul Stoffregon's windows serial installer.
    http://pjrc.com/teensy/serial_install.exe . It makes the operating system do what it is supposed to do when it sees a usb-cdc compliant driver: install the built in driver.

    Posted 11 months ago #
11. 

    mbolivar
    LeafLabs

    It makes the operating system do what it is supposed to do when it sees a usb-cdc compliant driver: install the built in driver.

    cute; we should steal this.

    Posted 11 months ago #
12. 

    feurig
    Member

    Yeah, Paul is clever.

    Posted 11 months ago #
13. 

    RAJENDRA
    Member

    @ Bionic-Badger
    i followed all our step by step procedure to dump the code to stm32 but when i plug the board and download the code using maple IDE it is giving the error saying Couldn't find the DFU device: [1EAF:0003] so what may be the problem please suggest me.

    Posted 9 months ago #
14. 

    crenn
    Moderator

    Can you put the Maple into perpetual bootloader mode? You can do this by holding reset and just after releasing it, holding down the BUT button until it is flashing. In device manager, it should tell you if there is a problem with the device, if there is, post the error here.

    Posted 9 months ago #
15. 

    RAJENDRA
    Member

    @ crenn

    I am bit confused with this mode,when i press and release reset button it blinks very fast 6 times then slowly it will blink, but when i press both reset and BUT button and first release reset button and then BUT button the LED is not blinking is this perpetual bootloader mode,as suggested by you first i hit reset, released it then pressed BUT button now the LED is continuously blinks is this perpetual bootloader mode? if I keep on holding BUT button the LED is not at all stopping blinking.
    Thank you

    Posted 9 months ago #

RSS feed for this topic

Reply »

You must log in to post.