Hello, new here. I have a Maple Rev 5 with me, and a project I'm hoping to make will utilize a LiPo battery too. On the Maple website's documentation for the hardware (http://leaflabs.com/docs/hardware/maple.html), I can see that the USB and EXT jumper selects between the USB port and Barrel-jack connection for charging the connected Lipo, but what does the BAT header-pair do? Run the Maple directly off of the Lipo?
Also, if we disconnect the USB or Barrel connector when the charging is done, does the Maple switch to using the LiPo battery power until one of the jacks is re-inserted?