LeafLabs Garden » Topic: Maple r5 reads ret6 files and errors

LeafLabs Garden » Topic: Maple r5 reads ret6 files and errors http://forums.leaflabs.com/topic.php?id=928 A place to share, learn, and grow... en-US Fri, 22 Jan 2016 00:22:56 +0000 http://bbpress.org/?v=1.0.2 <![CDATA[Search]]> q http://forums.leaflabs.com/search.php samtal on "Maple r5 reads ret6 files and errors" http://forums.leaflabs.com/topic.php?id=928#post-5783 Thu, 28 Jul 2011 13:40:59 +0000 samtal 5783@http://forums.leaflabs.com/ Thank poslathian I am still on it. It is related to some changes I made in the adc.c file, but I can not pinpoint to it. I will keep digging and will let you know of the result (if I can get to it). In the meantime I am adding functions to the latest adc.h that has many good functions, but not all that is necessary for good dual simultaneous sampling that I need. Once I get it all to work, I'll post it for you (or someone else) to test. The dual adc is a complex issue, due to the many options involved. For easy use and to cover all options there may be the need for some kind of internal or external table format questionnaire. samtal poslathian on "Maple r5 reads ret6 files and errors" http://forums.leaflabs.com/topic.php?id=928#post-5756 Tue, 26 Jul 2011 14:01:47 +0000 poslathian 5756@http://forums.leaflabs.com/ so I cant get the compiler to barf with RET6 errors with the board setting set to rev3+ after having previously uploaded with RET6 on xp32 using the analogIn example sketch. Can you provide the code that is causing your error code? Also, can you try opening a new sketch entirely (like blinky), selecting rev3+, putting the board into perpetual bootloader, and uploading it? poslathian on "Maple r5 reads ret6 files and errors" http://forums.leaflabs.com/topic.php?id=928#post-5754 Tue, 26 Jul 2011 13:55:51 +0000 poslathian 5754@http://forums.leaflabs.com/ that is quite mysterious. Let me see if I can reproduce it samtal on "Maple r5 reads ret6 files and errors" http://forums.leaflabs.com/topic.php?id=928#post-5743 Tue, 26 Jul 2011 03:24:55 +0000 samtal 5743@http://forums.leaflabs.com/ Hello, I changed by mistake my r5 board setting in the IDE 11 to ret6 (rather than to 3+), and despite changing back to 3+, I keep getting errors from ret6 files and very odd data readings. I searched to find where in the files the board type is selected, but could not find one. I thought it might be reading it from board itself, thus I re-flashed the bootloader. but for no avail. I still get ret6 errors like the following one and odd output, although there is nothing wrong in the function for r5 (It worked, and I get the same errors for Maple example). The error message: from E:\Maple\maple-ide-0.0.11-windowsxp32\hardware\leaflabs\cores\maple\maple_RET6.cpp:33: E:\Maple\maple-ide-0.0.11-windowsxp32\hardware\leaflabs\cores\maple\/adc.h: In function 'uint16 adc_read(const adc_dev*, uint8)': Thanks, samtal