LeafLabs Garden » Topic: Maple Mini doesn't work.

LeafLabs Garden » Topic: Maple Mini doesn't work. http://forums.leaflabs.com/topic.php?id=944 A place to share, learn, and grow... en-US Fri, 22 Jan 2016 00:09:16 +0000 http://bbpress.org/?v=1.0.2 <![CDATA[Search]]> q http://forums.leaflabs.com/search.php mbolivar on "Maple Mini doesn't work." http://forums.leaflabs.com/topic.php?id=944&page=2#post-11712 Fri, 13 Jul 2012 02:15:38 +0000 mbolivar 11712@http://forums.leaflabs.com/ Thanks for all your patience. Sorry to hear you're still having problems. One last thing to check: did you make sure that you uploaded the bootloader for the correct board? The Maple Mini bootloader is here: <a href="http://static.leaflabs.com/pub/leaflabs/maple-bootloader/maple_mini_boot.bin" rel="nofollow">http://static.leaflabs.com/pub/leaflabs/maple-bootloader/maple_mini_boot.bin</a> If that doesn't work, then it really sounds like you've got a busted board. dynamictoys on "Maple Mini doesn't work." http://forums.leaflabs.com/topic.php?id=944&page=2#post-11677 Tue, 10 Jul 2012 20:18:51 +0000 dynamictoys 11677@http://forums.leaflabs.com/ I bought a 3.3V USB to serial and finally get the flash verification OK. However, the LED on the board do not flash after reset. It does show up a new COM port but still download fail. same error message "Couldn't find the DFU device: [1EAF:0003]" Any idea? thanks! C:\Python26>python stm32loade Reading data from maple_mini_ Can't init. Ensure that BOOT0 Traceback (most recent call l File "stm32loader.py", line bootversion = cmd.cmdGet( File "stm32loader.py", line if self.cmdGeneric(0x00): File "stm32loader.py", line return self._wait_for_ask File "stm32loader.py", line raise CmdException("Unrec __main__.CmdException: Unreco C:\Python26>python stm32loade Reading data from maple_mini_ Bootloader version 0x22 Chip id '0x4 0x10' Writing 15744 bytes to start Write 256 bytes at 0x8000000 Write 256 bytes at 0x8000100 Write 256 bytes at 0x8000200 Write 256 bytes at 0x8000300 Write 256 bytes at 0x8000400 Write 256 bytes at 0x8000500 Write 256 bytes at 0x8000600 Write 256 bytes at 0x8000700 Write 256 bytes at 0x8000800 Write 256 bytes at 0x8000900 Write 256 bytes at 0x8000A00 Write 256 bytes at 0x8000B00 Write 256 bytes at 0x8000C00 Write 256 bytes at 0x8000D00 Write 256 bytes at 0x8000E00 Write 256 bytes at 0x8000F00 Write 256 bytes at 0x8001000 Write 256 bytes at 0x8001100 Write 256 bytes at 0x8001200 Write 256 bytes at 0x8001300 Write 256 bytes at 0x8001400 Write 256 bytes at 0x8001500 Write 256 bytes at 0x8001600 Write 256 bytes at 0x8001700 Write 256 bytes at 0x8001800 Write 256 bytes at 0x8001900 Write 256 bytes at 0x8001A00 Write 256 bytes at 0x8001B00 Write 256 bytes at 0x8001C00 Write 256 bytes at 0x8001D00 Write 256 bytes at 0x8001E00 Write 256 bytes at 0x8001F00 Write 256 bytes at 0x8002000 Write 256 bytes at 0x8002100 Write 256 bytes at 0x8002200 Write 256 bytes at 0x8002300 Write 256 bytes at 0x8002400 Write 256 bytes at 0x8002500 Write 256 bytes at 0x8002600 Write 256 bytes at 0x8002700 Write 256 bytes at 0x8002800 Write 256 bytes at 0x8002900 Write 256 bytes at 0x8002A00 Write 256 bytes at 0x8002B00 Write 256 bytes at 0x8002C00 Write 256 bytes at 0x8002D00 Write 256 bytes at 0x8002E00 Write 256 bytes at 0x8002F00 Write 256 bytes at 0x8003000 Write 256 bytes at 0x8003100 Write 256 bytes at 0x8003200 Write 256 bytes at 0x8003300 Write 256 bytes at 0x8003400 Write 256 bytes at 0x8003500 Write 256 bytes at 0x8003600 Write 256 bytes at 0x8003700 Write 256 bytes at 0x8003800 Write 256 bytes at 0x8003900 Write 256 bytes at 0x8003A00 Write 256 bytes at 0x8003B00 Write 256 bytes at 0x8003C00 Write 256 bytes at 0x8003D00 Read 256 bytes at 0x8000000 Read 256 bytes at 0x8000100 Read 256 bytes at 0x8000200 Read 256 bytes at 0x8000300 Read 256 bytes at 0x8000400 Read 256 bytes at 0x8000500 Read 256 bytes at 0x8000600 Read 256 bytes at 0x8000700 Read 256 bytes at 0x8000800 Read 256 bytes at 0x8000900 Read 256 bytes at 0x8000A00 Read 256 bytes at 0x8000B00 Read 256 bytes at 0x8000C00 Read 256 bytes at 0x8000D00 Read 256 bytes at 0x8000E00 Read 256 bytes at 0x8000F00 Read 256 bytes at 0x8001000 Read 256 bytes at 0x8001100 Read 256 bytes at 0x8001200 Read 256 bytes at 0x8001300 Read 256 bytes at 0x8001400 Read 256 bytes at 0x8001500 Read 256 bytes at 0x8001600 Read 256 bytes at 0x8001700 Read 256 bytes at 0x8001800 Read 256 bytes at 0x8001900 Read 256 bytes at 0x8001A00 Read 256 bytes at 0x8001B00 Read 256 bytes at 0x8001C00 Read 256 bytes at 0x8001D00 Read 256 bytes at 0x8001E00 Read 256 bytes at 0x8001F00 Read 256 bytes at 0x8002000 Read 256 bytes at 0x8002100 Read 256 bytes at 0x8002200 Read 256 bytes at 0x8002300 Read 256 bytes at 0x8002400 Read 256 bytes at 0x8002500 Read 256 bytes at 0x8002600 Read 256 bytes at 0x8002700 Read 256 bytes at 0x8002800 Read 256 bytes at 0x8002900 Read 256 bytes at 0x8002A00 Read 256 bytes at 0x8002B00 Read 256 bytes at 0x8002C00 Read 256 bytes at 0x8002D00 Read 256 bytes at 0x8002E00 Read 256 bytes at 0x8002F00 Read 256 bytes at 0x8003000 Read 256 bytes at 0x8003100 Read 256 bytes at 0x8003200 Read 256 bytes at 0x8003300 Read 256 bytes at 0x8003400 Read 256 bytes at 0x8003500 Read 256 bytes at 0x8003600 Read 256 bytes at 0x8003700 Read 256 bytes at 0x8003800 Read 256 bytes at 0x8003900 Read 256 bytes at 0x8003A00 Read 256 bytes at 0x8003B00 Read 256 bytes at 0x8003C00 Read 256 bytes at 0x8003D00 Verification OK crenn on "Maple Mini doesn't work." http://forums.leaflabs.com/topic.php?id=944#post-11381 Tue, 26 Jun 2012 04:30:28 +0000 crenn 11381@http://forums.leaflabs.com/ It doesn't need to be in any exact place as far as I can see as you just need to run the setup script that's included in the download. You should get an output similar to this: <a href="http://www.crennsmind.com/Code/Python/Setup/pyserial_setup_output.txt" rel="nofollow">http://www.crennsmind.com/Code/Python/Setup/pyserial_setup_output.txt</a> If you don't recall something like this, try this: <ol> <li>Goto the start menu and type in cmd to get to the command prompt and press Ctrl+Shift+Enter to start it in Administrative mode. Alternatively, goto All Programs->Accessories and right click on Command Prompt and select "Run as administrator".(Administrator mode probably is not needed)</li> <li>Use "cd" to move to the directory you extracted pyserial to. Some zip programs will require you to extract the tar.gz file twice. If it's in a folder in the root of C:\, it will make it easier to get to. If you start in something like "C:\Windows\system32" when opening command prompt, just type in "cd \" as this will take you to the root of C:\.</li> <li>Type in "dir /w" and ensure you can see setup.py</li> <li>Type in "setup.py install" and it should install itself into the python install directory</li> </ol> dynamictoys on "Maple Mini doesn't work." http://forums.leaflabs.com/topic.php?id=944#post-11376 Mon, 25 Jun 2012 17:41:05 +0000 dynamictoys 11376@http://forums.leaflabs.com/ Yes, I did download and installed that PySerial-2.6. But should I just put the PySerial at the root of C:\ or under Python27? How the phtyon know the folder location? Thanks! crenn on "Maple Mini doesn't work." http://forums.leaflabs.com/topic.php?id=944#post-11360 Sun, 24 Jun 2012 05:34:27 +0000 crenn 11360@http://forums.leaflabs.com/ Did you also install PySerial? <a href="http://pyserial.sourceforge.net/" rel="nofollow">http://pyserial.sourceforge.net/</a> dynamictoys on "Maple Mini doesn't work." http://forums.leaflabs.com/topic.php?id=944#post-11359 Sat, 23 Jun 2012 18:55:02 +0000 dynamictoys 11359@http://forums.leaflabs.com/ Hi, I setup Python27 on PC Windows Vista. Save the file stm32loader.py the same Python27 folder, also save maple mini bootloader binary then run the following command prompt. It show the error of line 26. How to solve it? Thanks again! C:\Python27>python stm32loader.py -p COM4 -evw maple_mini_boot.bin Traceback (most recent call last): File "stm32loader.py", line 26, in <module> import serial ImportError: No module named serial crenn on "Maple Mini doesn't work." http://forums.leaflabs.com/topic.php?id=944#post-11350 Thu, 21 Jun 2012 19:49:37 +0000 crenn 11350@http://forums.leaflabs.com/ With Windows 7 64-bit, the DFU driver does not work with the included package. Try the instructions found in this link: <a href="http://forums.leaflabs.com/topic.php?id=73#post-788" rel="nofollow">http://forums.leaflabs.com/topic.php?id=73#post-788</a> To make sure it is this problem, look in the Control Panel and open up the Device Manager. Put the Maple Mini into perpetual bootloader mode (Press and hold reset, straight after releasing the reset button, press the BUT button for 5-10 seconds or until the Maple Mini is flashing continously) and check that there isn't a 'warning' for the device under lib-usb32. If the bootloader is not functioning correctly, then it will need to be reflashed, follow the direction mbolivar's post gives to reflash it. dynamictoys on "Maple Mini doesn't work." http://forums.leaflabs.com/topic.php?id=944#post-11349 Thu, 21 Jun 2012 18:38:16 +0000 dynamictoys 11349@http://forums.leaflabs.com/ Is that also relate to the Windows 7? I had experience that my Arduino cannot be download using Windows 7, it only work on my Windows XP machine. mbolivar on "Maple Mini doesn't work." http://forums.leaflabs.com/topic.php?id=944#post-11347 Thu, 21 Jun 2012 18:16:25 +0000 mbolivar 11347@http://forums.leaflabs.com/ That's very strange. It sounds like the bootloader is not functioning correctly. Did you get the Maple Mini new, or was it used? If it's new, it sounds like the board should not have passed QA testing, and we're very sorry for the trouble you've been having. If you want to try to get the board you have working, you can try flashing a fresh bootloader (see below). Otherwise, please contact us at <a href="mailto:info@leaflabs.com">info@leaflabs.com</a> so we can discuss a return. If you've got the equipment (all you need is some jumper wire and an FTDI breakout board, like those available on SparkFun), you can try flashing a fresh bootloader using the instructions here: <a href="http://leaflabs.com/docs/bootloader.html#flashing-a-custom-bootloader" rel="nofollow">http://leaflabs.com/docs/bootloader.html#flashing-a-custom-bootloader</a> Since you're using Maple Mini, make sure you tie BOOT1 (pin 2) to ground. dynamictoys on "Maple Mini doesn't work." http://forums.leaflabs.com/topic.php?id=944#post-11346 Thu, 21 Jun 2012 18:01:40 +0000 dynamictoys 11346@http://forums.leaflabs.com/ No, it does not blink. After reset, it turn off for few seconds and keep turn on all the time. But it does show up a new COM port in the IDE under Serial Port selection. mbolivar on "Maple Mini doesn't work." http://forums.leaflabs.com/topic.php?id=944#post-11345 Thu, 21 Jun 2012 17:57:34 +0000 mbolivar 11345@http://forums.leaflabs.com/ Let me check to make sure I understand: when you press reset, the LED doesn't go through the bootloader blinking period (fast blinks, then slow blinks). It just turns on, and doesn't blink? dynamictoys on "Maple Mini doesn't work." http://forums.leaflabs.com/topic.php?id=944#post-11342 Thu, 21 Jun 2012 17:24:03 +0000 dynamictoys 11342@http://forums.leaflabs.com/ Hi, My IDE is V0.0.12, Windows 7 64 bit. I am also not able to download to the Maple Mini R2. I try both to flash or to RAM. The first time I plug in, it search for the driver, I point the driver to the maple folder witch is maple-ide-0.0.12-windowsxp32\driver and the driver can installed OK. Now the Maple Mini has the LED keep turn on, not blinking at all. Even press Reset once, it just off for few seconds and turn back on, not blinking. When I had select suitable port in the IDE and try to upload, it has following message Binary sketch size is reported above. Check it against a 108000 byte maximum. Loading via dfu-util Resetting to bootloader via DTR pulse Searching for DFU device [1EAF:0003]... dfu-util - (C) 2007-2008 by OpenMoko Inc. This program is Free Software and has ABSOLUTELY NO WARRANTY Couldn't find the DFU device: [1EAF:0003] Anyone know how to fix it. Thanks so much! pra on "Maple Mini doesn't work." http://forums.leaflabs.com/topic.php?id=944#post-5912 Fri, 05 Aug 2011 18:05:21 +0000 pra 5912@http://forums.leaflabs.com/ New one works just fine - so I'll be sending this one back! Thanks for the help poslathian on "Maple Mini doesn't work." http://forums.leaflabs.com/topic.php?id=944#post-5863 Wed, 03 Aug 2011 09:51:23 +0000 poslathian 5863@http://forums.leaflabs.com/ Peter, I am sorry to hear you had trouble with the Mini. Thanks for the terminal dump, it certainly looks like the USB just isnt there. Every board is uploaded with a test sketch at the factory to verify the USB is working and the jack is correctly installed. However, it is possible that a bad solder joint somewhere broke free in transit. Send us an email at info at leaflabs com and we will see if we cant swap it out for you! pra on "Maple Mini doesn't work." http://forums.leaflabs.com/topic.php?id=944#post-5854 Tue, 02 Aug 2011 16:38:04 +0000 pra 5854@http://forums.leaflabs.com/ IDE version 0.0.11, Mac OS X 10.7, but also tried with 10.6 dfu-util -l response: dfu-util - (C) 2007 by OpenMoko Inc. This program is Free Software and has ABSOLUTELY NO WARRANTY Found Runtime: [0x05ac:0x8215] devnum=0, cfg=0, intf=3, alt=0, name="UNDEFINED" USB Info from Utilities/System Information USB Bus: Host Controller Location: Built-in USB Host Controller Driver: AppleUSBOHCI PCI Device ID: 0x0aa5 PCI Revision ID: 0x00b1 PCI Vendor ID: 0x10de Bus Number: 0x04 IR Receiver: Product ID: 0x8242 Vendor ID: 0x05ac (Apple Inc.) Version: 0.16 Speed: Up to 1.5 Mb/sec Manufacturer: Apple Computer, Inc. Location ID: 0x04500000 / 2 Current Available (mA): 500 Current Required (mA): 100 IR Receiver: Product ID: 0x8242 Vendor ID: 0x05ac (Apple Inc.) Version: 0.16 Speed: Up to 1.5 Mb/sec Manufacturer: Apple Computer, Inc. Location ID: 0x04500000 / 2 Current Available (mA): 500 Current Required (mA): 100 USB Bus: Host Controller Location: Built-in USB Host Controller Driver: AppleUSBOHCI PCI Device ID: 0x0aa7 PCI Revision ID: 0x00b1 PCI Vendor ID: 0x10de Bus Number: 0x06 BRCM2046 Hub: Product ID: 0x4500 Vendor ID: 0x0a5c (Broadcom Corp.) Version: 1.00 Speed: Up to 12 Mb/sec Manufacturer: Apple Inc. Location ID: 0x06100000 / 2 Current Available (mA): 500 Current Required (mA): 0 Bluetooth USB Host Controller: Product ID: 0x8215 Vendor ID: 0x05ac (Apple Inc.) Version: 1.82 Serial Number: 64B9E8E72597 Speed: Up to 12 Mb/sec Manufacturer: Apple Inc. Location ID: 0x06110000 / 5 Current Available (mA): 500 Current Required (mA): 0 BRCM2046 Hub: Product ID: 0x4500 Vendor ID: 0x0a5c (Broadcom Corp.) Version: 1.00 Speed: Up to 12 Mb/sec Manufacturer: Apple Inc. Location ID: 0x06100000 / 2 Current Available (mA): 500 Current Required (mA): 0 Bluetooth USB Host Controller: Product ID: 0x8215 Vendor ID: 0x05ac (Apple Inc.) Version: 1.82 Serial Number: 64B9E8E72597 Speed: Up to 12 Mb/sec Manufacturer: Apple Inc. Location ID: 0x06110000 / 5 Current Available (mA): 500 Current Required (mA): 0 Bluetooth USB Host Controller: Product ID: 0x8215 Vendor ID: 0x05ac (Apple Inc.) Version: 1.82 Serial Number: 64B9E8E72597 Speed: Up to 12 Mb/sec Manufacturer: Apple Inc. Location ID: 0x06110000 / 5 Current Available (mA): 500 Current Required (mA): 0 USB High-Speed Bus: Host Controller Location: Built-in USB Host Controller Driver: AppleUSBEHCI PCI Device ID: 0x0aa6 PCI Revision ID: 0x00b1 PCI Vendor ID: 0x10de Bus Number: 0x24 Built-in iSight: Product ID: 0x8502 Vendor ID: 0x05ac (Apple Inc.) Version: 2.30 Serial Number: 8J9CV2FC077G3A00 Speed: Up to 480 Mb/sec Manufacturer: Apple Inc. Location ID: 0x24400000 / 2 Current Available (mA): 500 Current Required (mA): 500 Built-in iSight: Product ID: 0x8502 Vendor ID: 0x05ac (Apple Inc.) Version: 2.30 Serial Number: 8J9CV2FC077G3A00 Speed: Up to 480 Mb/sec Manufacturer: Apple Inc. Location ID: 0x24400000 / 2 Current Available (mA): 500 Current Required (mA): 500 USB High-Speed Bus: Host Controller Location: Built-in USB Host Controller Driver: AppleUSBEHCI PCI Device ID: 0x0aa9 PCI Revision ID: 0x00b1 PCI Vendor ID: 0x10de Bus Number: 0x26 Internal Memory Card Reader: Product ID: 0x8403 Vendor ID: 0x05ac (Apple Inc.) Version: 98.33 Serial Number: 9833 Speed: Up to 480 Mb/sec Manufacturer: Apple Location ID: 0x26500000 / 3 Current Available (mA): 500 Current Required (mA): 500 USB Reader: Product ID: 0x6337 Vendor ID: 0x058f (Alcor Micro, Corp.) Version: 1.00 Serial Number: 058F63376377 Speed: Up to 480 Mb/sec Manufacturer: Location ID: 0x26200000 / 2 Current Available (mA): 500 Current Required (mA): 100 Internal Memory Card Reader: Product ID: 0x8403 Vendor ID: 0x05ac (Apple Inc.) Version: 98.33 Serial Number: 9833 Speed: Up to 480 Mb/sec Manufacturer: Apple Location ID: 0x26500000 / 3 Current Available (mA): 500 Current Required (mA): 500 USB Reader: Product ID: 0x6337 Vendor ID: 0x058f (Alcor Micro, Corp.) Version: 1.00 Serial Number: 058F63376377 Speed: Up to 480 Mb/sec Manufacturer: Location ID: 0x26200000 / 2 Current Available (mA): 500 Current Required (mA): 100 ** no mention of anything Maple, even though the mini is plugged in, supposedly in perpetual boot loader mode and led is flashing. I have ordered another mini and hopefully I will have it by the weekend. If it works, then it will tell us something; if it doesn't it will tell us something different :-) Peter